Psion Teklogix 7535 G2 Uživatelský manuál stáhnout pdf (Strana 283)

Psion Teklogix 7535 G2 Hand-Held Computer User Manual C-11

Appendix C: Bar Code Settings

Decoded (Internal) Scanners

Decoded (Internal) 2D Scanning Options

Scan Angle

This option allows you to choose from two scan angles: Normal Angle or Alternate Angle.

Choosing Normal Angle allows the normal operation for scanning long range and short

range. Choosing Alternate Angle widens the beam to allow scanning of long bar codes at

short range but at the cost of long range scanning.

C.2.3 Decoded (Internal) 2D Scanning Options

Scanning Mode

When you double-tap on this parameter, a dialog box is displayed in which you can choose

one of the following scanning modes: Smart Raster, Always Raster, Programmable Raster,

Slab Pattern, Cyclone Pattern, or Semi-Omni Pattern.

Raster Height And Raster Expand Rate

These parameters determine the laser pattern’s height and rate of expansion.

Double-tapping on these parameters displays dialog boxes in which you can enter a value

from 1 to 15.

C.2.4 Decoded (Internal) Data Options

Transmit Code ID Char

A code ID character identifies the scanned bar code type. In addition to any single character

prefix already selected, the code ID character is inserted between the prefix and the decoded

symbol.

When you double-tap on this parameter, a dialog box is displayed in which you can choose a

transmit code: None, AIM or Symbol.

Scan Data Format

This parameter allows you to change the scan data transmission format.

Double-tapping on Scan Data Format displays the following options from which you can

choose a data format: data (as-is), data [S1], data [S2], data [S1][S2], [P] data, [P] data

[S1], [P] data [S2] and [P] data [S1][S2].

Note: These parameters are only used when either Programmable Raster or

Always Raster is assigned to the “2D Scanning Mode” parameter. “2D Raster

Height” and “2D Raster Expand Rate” are intended for very specific applications

and are usually not required for normal scanning purposes.

1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 371 372

Žádné komentáře

Psion Teklogix 7535 G2 Uživatelský manuál Strana 283