Psion Teklogix Win CE 4.2 Uživatelský manuál stáhnout pdf (Strana 154)

Chapter 7: Expansion Modules

Installing An SE 1223HP Scanner

128

Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual

• Remove the batteries. If your unit is using AC power, disconnect it.

• Remove the end-cap at the top of the WORKABOUT PRO.

• Slide the SW1401 switch to the left to shut off internal battery power.

With the power shut down, you can install the GSM/GPRS module and the antenna.

• Slide the GSM/GPRS radio under the metal frame, and align the

GSM/GPRS connector with the expansion connector on the WORK-

ABOUT PRO. Apply slight pressure to snap the module into place on the

hand-held.

• Use the screws provided to secure the module in place.

• Fit the antenna at the top of the unit making certain that the antenna

contacts are aligned with the contacts on the GSM/GPRS module.

• Use the screws provided to secure the antenna on the metal frame.

Figure 7.7 An Installed GSM/GPRS Module

• Slide the SW1401 switch to the right to turn power back on.

• Replace the end-cap, back plate and batteries.

7.1.6 Installing An SE 1223HP Scanner

The SE 1223HP scanner is the internal scanner module available with the

WORKABOUT PRO. To install it:

• Remove the batteries. If your unit is using AC power, disconnect it.

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 215 216

Žádné komentáře

Psion Teklogix Win CE 4.2 Uživatelský manuál Strana 154