Psion Teklogix 9160 G2 Uživatelský manuál stáhnout pdf (Strana 187)

Chapter 15: Configuring VLANs

Updating Settings

Psion Teklogix 9160 G2 Wireless Gateway User Manual 163

15.3 Updating Settings

To update VLAN settings:

1. Navigate to the VWN tab page.

2. Configure the VLAN settings as required.

3. Click the Update button to apply the changes.

Broadcast SSID

Select the

Broadcast SSID

setting by selecting the

Broadcast SSID

checkbox.

By default, the access point broadcasts (allows) the

Service Set Identifier

(SSID) in its beacon frames.

You can suppress (prohibit) this broadcast to discourage stations from automatically discovering your

access point. When the AP’s broadcast SSID is suppressed, the network name will not be displayed in the

List of Available Networks on a client station. Instead, the client must have the exact network name config-

ured in the supplicant before it will be able to connect.

Note: The Broadcast SSID you set here is specifically for this Virtual Network (One or Two).

Other networks continue to use the security modes already configured:

• Your original Internal network (configured on the Ethernet Settings page) uses the Broadcast

SSID set on Security.

• If a Guest network is configured, the Broadcast SSID is always allowed.

Security

Select the

Security Mode

for this VLAN. Select one of the following:

• None (Plain-text)

• Static WEP

• WPA Personal

Note: The Security mode you set here is specifically for this Virtual Network. Other networks

continue to use the security modes already configured:

• Your original Internal network (configured on the Ethernet Settings page) uses the Security

mode set on Security.

• If a Guest network is configured, always set the security mode to “None”.

Table 15.1 Virtual Wireless Network Settings

Field Description

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 435 436

Žádné komentáře

Psion Teklogix 9160 G2 Uživatelský manuál Strana 187