Psion Teklogix 9160 G2 Uživatelský manuál stáhnout pdf (Strana 64)

100

101

Chapter 4: Quick Steps For Setup And Launch

A Note About Setting Up Connections For A Guest Network

40 Psion Teklogix 9160 G2 Wireless Gateway User Manual

4.2.1 A Note About Setting Up Connections For A Guest Network

The 9160 G2 Wireless Gateway offers an out-of-the-box Guest Interface that allows you to

configure an access point for controlled guest access to the network. The same access point

can function as a bridge for two different wireless networks: a secure “Internal” LAN and a

public “Guest” network. This can be done virtually, by defining two different Virtual LANs

via the Administration UI.

For information on configuring Guest interface settings on the Administration UI, see

Chapter 14: “Setting Up Guest Access”.

4.2.1.1 Hardware Connections For A Guest VLAN

If you plan to configure a guest network using VLANs, do the following:

• Connect a network port on the access point to a VLAN-capable switch.

• Define VLANs on that switch.

4.3 Power On The Access Point

The 9160 G2 Wireless Gateway powers on and initializes when you plug it in.

4.4 Log On To The Administration Web Pages

When you go to the IP address of the 9160 G2 Wireless Gateway Administration Web

pages, you are prompted for a user name and password.

The defaults for user name and password are as follows.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 435 436

Komentáře k této Příručce

Žádné komentáře

Psion Teklogix 9160 G2 Uživatelský manuál Strana 64

Komentáře k této Příručce