Psion Teklogix netpad Uživatelský manuál Strana 41

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 230
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 40
Psion Teklogix netpad Windows CE .NET 4.2 User Manual 15
Chapter 2: Getting Started
Battery Care
Figure 2.7 Battery Insertion
Important: Take care when replacing batteries! The netpad will warn you
when its main battery is getting low. The backup battery is
designed to maintain the memory for several hours. However,
prolonged reliance on the backup battery does reduce its life.
2.3.1.2 Charging The netpad Battery Pack
To charge the battery, attach the battery pack to the netpad and place the complete
netpad in a netpad docking station (for instructions, please refer to page 43), or place
the battery in one of the optional battery chargers (see “Battery Charger Instruc-
tions” on page 163). The standard (1800 mAH) netpad battery will normally be
fully charged within 4 hours.
2.3.1.3 Changing Battery Packs
If you are using your netpad away from the charger and a spare battery pack is avail-
able, you can change batteries when the battery warning is displayed. To do this:
1. Switch the netpad off.
2. Press on the battery pack latch to remove it.
3. Push in the replacement battery pack.
Important: Always switch off the netpad before removing the main battery.
Never remove the battery from the netpad while it is in the docking
station.
Never use a netpad without a battery in the docking station.
Battery Pack
Direction o
f
Insertion
Battery
Latch
Battery Contact Pins
Zobrazit stránku 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 229 230

Komentáře k této Příručce

Žádné komentáře