Psion Teklogix WA1210-G2 Uživatelský manuál stáhnout pdf (Strana 11)

3Psion Teklogix WAPro Vehicle Cradle User Manual

Important: The WORKABOUT PRO Vehicle Cradles are

designed to be compatible with any RAM-B

mounting interface.

Note: In addition, for safety reasons, only pedestal mounts with

fully locking joints should be used in vehicles. Always

adjust the pedestal for the optimum viewing angle, and

securely tighten the hex and wing screws.

The most effective way to mount the Vehicle Cradle RAM

mount is to use the seven #8-32X 3/8 threaded inserts on the

rear of the unit. Bolts must not extend more than .20” into the

Vehicle Cradle.

If you wish to custom mount the Vehicle Cradle to a surface

other than the recommended Ram-B, please take the following

precautions:

When installing the cradle, ensure the driver’s view is not 1.

obstructed.

Install cradles so as to not obstruct vehicle safety features, 2.

i.e. airbags, seat belts, etc.

Ensure cradle is secured to the vehicle in a safe location. 3.

Injury may result otherwise.

Ensure the mounting has capacity to hold the cradle and 4.

terminal. Cradle plus terminal weight is approx. 2 lbs.

Psion Teklogix has recommended and approved mounts. 5.

Consult Psion Teklogix Customer Service for direction.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Žádné komentáře

Psion Teklogix WA1210-G2 Uživatelský manuál Strana 11