Psion Teklogix WA1210-G2 Uživatelský manuál stáhnout pdf (Strana 12)

Psion Teklogix WAPro Vehicle Cradle User Manual4

To accommodate the service loop of the connector cable, leave

a 4” clearance at the bottom of the Vehicle Cradle. Leave a 7”

clearance at the top of the Vehicle Cradle to allow easy removal

of the WORKABOUT PRO. Refer to the detailed assembly

instructions that are packaged with the pedestal when selecting a

mounting location.

Note: A template for the Vehicle cradle rear mount system is

provided on the next page. Remove that page only - to use

this template.

Please be aware:

Before Psion Teklogix releases a product, our engineering team

exposes that product through a series of severe testing to ensure

it will survive in the rugged environments in which our products

are typically used. These tests usually include shock and vibra-

tion testing as well as IP testing for water and dust, electrical

shock, etc.

The third party should perform the same type of testing in order

to ensure the design will maintain the factory specications of

the product. If the third party company is unwilling to perform

the necessary testing and take responsibility for the affects of

the design, then we highly recommend using Psion Teklogix

designed and supported accessories.

If you elect to use a third party company produced cradle, Psion

Teklogix cannot take responsibility for the affects of that third

party product when it causes failure to our device.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Žádné komentáře

Psion Teklogix WA1210-G2 Uživatelský manuál Strana 12